Results 1 to 9 of 9

Thread: SuperX-Maxx update

  1. #1
    Robin Oury, UE's owner MonsterMaxx's Avatar
    Join Date
    Jul 2003
    Location
    Insanity Central
    Posts
    10,716

    SuperX-Maxx update

    Been a while since I updated this, today seems a good day.

    Seems like forever ago that the truck got a Futaba upgrade.

    Since then it’s gotten the
    Hot Racing Shock Springs

    Hot Racing Steering system

    Savox 2230SG and TRX mount. (the HR brass servo gears I was running spun one gear on the other – no warranty)

    Unlimited Engineering Titanium Pin Set w/ Lower Arm Retention

    Unlimited Engineering Titanium Link set

    Unlimited Engineering Hardened Steel Shock shafts

    Castle Creations XLX and their Y-harness
    4s 6000 packs

    Proline Pins for the 5ive-T and RC Monster adaptors. Also have a set of 5ive-B tires on order.

    And a few other goodies that are still under wraps.
    Truck is night and day different from stock now and I’m really enjoying it bashing around and on the racetrack.
    “That which doesn’t kill me, makes me stronger.” - Nietzsche

  2. #2
    Veteran KiKiMaX's Avatar
    Join Date
    May 2005
    Location
    France
    Posts
    346
    Awesome news for the shock shafts . We just need to use the stock rodend ? I need to order some shaft. I have broken one today.

    Can't wait to see your other goodies Robin
    HVL:VBS, Racer X, NEU 1521, 6S
    Pred: Predator, Mono, VBS , Racer X+setback, Rb SP10...

  3. #3
    Robin Oury, UE's owner MonsterMaxx's Avatar
    Join Date
    Jul 2003
    Location
    Insanity Central
    Posts
    10,716
    Yup, re-use stock rod end.
    “That which doesn’t kill me, makes me stronger.” - Nietzsche

  4. #4
    Veteran KiKiMaX's Avatar
    Join Date
    May 2005
    Location
    France
    Posts
    346
    Good news. Did you still run with the stock differential?

    The Hardened Steel Shock shafts are in stock? I will see with an American guy for the order
    HVL:VBS, Racer X, NEU 1521, 6S
    Pred: Predator, Mono, VBS , Racer X+setback, Rb SP10...

  5. #5
    Robin Oury, UE's owner MonsterMaxx's Avatar
    Join Date
    Jul 2003
    Location
    Insanity Central
    Posts
    10,716
    Oops, we are still testing the shock shafts and all the protos are out in the field, but I'm pretty sure after the thrashing I gave it last night everything is OK. Should be 2-3 weeks for more.

    You can order from us directly. It's more painful than a US order but not impossible, I do it all the time for the V-Rod fuel tank guys.
    “That which doesn’t kill me, makes me stronger.” - Nietzsche

  6. #6
    Veteran KiKiMaX's Avatar
    Join Date
    May 2005
    Location
    France
    Posts
    346
    Robin,did you have any news for the Hardened Steel Shock shafts ?
    HVL:VBS, Racer X, NEU 1521, 6S
    Pred: Predator, Mono, VBS , Racer X+setback, Rb SP10...

  7. #7
    Veteran KiKiMaX's Avatar
    Join Date
    May 2005
    Location
    France
    Posts
    346
    Hey Robin what's the news about your x-maxx ? I saw you run with the 3080 lehner. Will be huge torque for the X-Maxx
    HVL:VBS, Racer X, NEU 1521, 6S
    Pred: Predator, Mono, VBS , Racer X+setback, Rb SP10...

  8. #8
    Robin Oury, UE's owner MonsterMaxx's Avatar
    Join Date
    Jul 2003
    Location
    Insanity Central
    Posts
    10,716
    I've got to finish wiring it, but yea, should be freaky powerful, it's geared for 70mph
    “That which doesn’t kill me, makes me stronger.” - Nietzsche

  9. #9
    Veteran KiKiMaX's Avatar
    Join Date
    May 2005
    Location
    France
    Posts
    346
    Hi Robin
    Any news for the x-maxx parts ?
    HVL:VBS, Racer X, NEU 1521, 6S
    Pred: Predator, Mono, VBS , Racer X+setback, Rb SP10...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •