Unlimited Engineering, Inc
500 Dunwoody Drive
Simpsonville, SC 29681
Sales@UEusa.net

 

Log In Customer Service Your Cart Check Out

Advanced

Explode tree
Collapse tree

_____________
By Manufacturer
Unlimited Engineering
Dace Manufacturing
Great Assembly RC
Kippster Racing
Nomadio
Pro-Line
RB Concept
Strobe
Traxxas
Waller
Miscellaneous
__________
By Category
Vehicle Kit
Bearings
Bulkhead
Bulkless
Chassis
Clutch
Differential
Driveshaft
Electronics
Engine
Exhaust
Glue
Oil
Promotional
Suspension
Tire
Tool
Transmission
Wheel

SKU: 13503S

Catagory: Driveshaft Manufacturer: UE

Description: SuperSavage CVDS, Steel (pair)
Fits : Savage

 

 

New SuperDuty Savage CVDS:

  • 10x stronger than cross hole axles.
  • Lighter than stock
  • 6mm thread is 50% stronger than the 5mm thread on std axles.
  • Designed with the big block high horsepoer users in mind.

Requires:

  • 10mm socket or nut driver (some wheels do not have much clearance and you will need to turn the socket down a little)
  • Std Savage/Maxx wheel hole is 6mm, however repeated tightenings of the nut may 'squish' this down a little, it may be necessary to open the hole back up to 6mm.

UE CVDS Features:

  • Designed to take the horsepower of today's high powered .21 engines.
  • Designed to be long enough to double nut. If you've ever had a wheel come off in a race, you know how great a feature this is.
  • We've redesigned the axles to remove the weak area caused by the dowel pin. We made several based on the stock design but were totally unsatisfied with testing of it's strength. Then I started looking at my stock and aftermarket axles and found them all to be bent. To eliminate the weak area caused by the through hole for the dowel pin we've created a special 14mm wheel hex and keyed it to the axle. The design is 10x stronger. We've used materials that are 3x stronger than the stock material. Under severe testing the axles are still straight.
  • Titanium CV shaft for super strength and light weight. Also available in Steel for a lower cost. Weight difference is 8-10 grams each.
  • Hardened steel axle, drive cup and hex nut for long life and the ultimate in strength
  • Heavy duty dowel pins.
  • Sold in Pairs, two pairs required per truck

It is extremely important that these be installed correctly. Failure to do so will cause premature failure.
The instructions will show how to install these correctly. Failure to do so will void your warranty. Do not use grease or other sticky lubricants - they will suspend grit in the grease and will essentially become grinding compound. Use dry type lubricants.

Note: requires wheels with Traxxas standard 14mm hex mounting.

 
List Price: $85.00 Sale Price: $76.50
That's 10% off! YOU SAVED $8.50
In Stock Quantity:




 SuperMaxx CVDS, EXT (pair) 8mm Axle, Steel, For 7.5 diffs (No Drive Cups)
More Info
 
 
More Info
 
 
More Info
 
 
More Info
 
 
More Info
 SuperMaxx CVDS, EXT (pair) 8mm Axle, Steel)
More Info
New SuperX-Maxx Wing Mount
Sale Price: $ 45.99
In stock soon, pre-order now
 
Buy one, get the 2nd at half price!
Sale Price: $ 90
More Info  buy now
 
SuperMaxx Springs, for SuperShocks, BUY ONE GET ONE FREE
Sale Price: $
More Info  buy now
 
SuperArmor Hidden Winch
Sale Price: $
Single Center Bar
 

 

Copyright 2000-2003 Unlimited, Inc All Rights Reserved